Article Marketing | Article | Directories | Contents | Drywall Mold Information

Drywall Mold Information

Posted on July 20, 2010
Filed Under Home | Leave a Comment

Drywall mold presents a problem for many homeowners. Normally, mold is easily removed from just about any surface. This isn’t true for drywall because it isn’t easy to clean. In fact, drywall should remain dry at all times. Too much moisture can cause it to sag and get too soft. When mold grows on it, the only option is usually to replace the area.

What is Drywall?

Drywall is construction material used for building walls. It’s commonly used in commercial buildings and homes to create walls and ceilings. The panels are made of gypsum plaster, and then pressed between two thick sheets of paper. The panels are then dried and used for building purposes.

As you can imagine, any item made with paper does not withstand water very well. It’s not that drywall can’t withstand any moisture, it’s just that too much moisture will cause a problem.

Because of the inability to thoroughly clean drywall, some of it contains fiberglass. Some drywall is made with fiberglass instead of paper. This helps prevent mold growth because it grows on paper, but not on fiberglass.

It’s common for the fungi to grow on drywall that’s been exposed to plumbing leaks or floods. Using fiberglass prevents the problem, and saves you the trouble of replacing the wall.

If you’re building a home, use drywall that contains fiberglass. It’s just as good as the kind made with paper. Plus, you won’t have to worry about fungi growing on your walls.

When you buy a new home, you can also ask about what materials were used to build the house. You should also get an inspector to check the walls and rooms for signs of water damage mold. Mold loves water, and you could mistakenly buy a house with a fungi problem lurking in the walls.

What if Mold is Growing on the Wall?

The best solution is to remove the damaged portion of the drywall. Cleaning it will only make a mess. You could possibly create a hole or weaken that part of the wall. Replacing the area isn’t as difficult as it sounds.

You would need to neatly cut away the damaged area. After that, inspect inside the wall to see if more mold is present. If it is, clean the area until no mold is visible. You should also take this chance to repair any leaks that are inside the wall.

Once the water repair and mold removal is finished, replace the damaged wall with new drywall. If you can’t do this yourself, call a professional for help. This really isn’t a job you should do without the proper training.

It’s important to take care of the problem as soon as possible. The longer you wait, the more the problem can spread. Having to replace a small section of the wall isn’t that bad. But if you wait, you might have to replace an entire wall. Drywall mold is a nuisance, but it’s not impossible to deal with if you take action in time.

Related Posts

  1. Black Mold Removal Saftey Tips
  2. Solar Pathway Light Information
  3. Before You Setup Your New Reclining Leather Chair
  4. The Water Dispenser: A Great Way to Get Reliably Good Water
  5. The Useful A3 Laminator Machine

Comments

Leave a Reply




-->